Tutorials




Here is a tutorial of this quick and easy scrap fabric banner:
Supplies
  • Double sided fabric
  • String or thin ribbon
  • Scissors
You will want double sided fabric.  Most fabrics come with a print on one side and white on the other. This is fine if this is what you are going for, but I personally like my fabric to be the same on both sides. For the banner you see above I chose 6 different prints and I purchased a half a yard of each print.

STEP 1:
Cut slits into the fabric. Using your hands, tear off each strip of fabric. I cut my strips about 2 inches each. This is what is so great is you don’t have to be perfect, and all the sizes can be different.






STEP 2:
Loop the fabric strip over your string.




STEP 3:
Pull the two ends through the loop and pull tight!



No comments:

Post a Comment